Log cards
Empty values
What an empty value (—) means
The short version
- A dash (—) means unknown. It is not 0, not No, and not a default value.
- Leave a value empty when you don’t know it or it doesn’t apply. Enter 0 or No only when that is what really happened.
- On a tracker with a schedule, an empty value is estimated in your stats. The estimate is shown separately and never mixed into what you recorded.
What the dash means
When an entry shows — next to a metric, nothing was recorded for it. The app does not guess, fill in a default, or treat it as zero. It is simply unknown.
That matters because a dash is easy to misread. It is not the same as 0 steps, 0 glasses of water, a No, or an empty note. It says “no information”, and your stats treat it exactly that way.
On the entry form a Yes/No or a choice is a list whose first entry is (Empty), and it starts there. Once saved, an empty one shows as — here.
A day, week, month or year with no entry at all is treated the same as an entry whose value is empty: in both cases nothing was recorded for that period. (Pie charts are the exception: a card with an empty choice still counts, as Uncategorized.)
Two kinds of trackers
How an empty value affects your stats depends on the kind of tracker it belongs to.
- Trackers with a schedule (daily, weekly, monthly or yearly) expect an entry in every period. When a period is empty, the app knows something is missing, so it estimates it.
- Anytime trackers have no schedule: you log them whenever something happens. Nothing is ever “missing”, so nothing is estimated. An empty value is left out of totals and averages and shows as a gap in the chart.
What you see in your stats
For numbers, Yes/No metrics and choices that have numbers, your stats can show two things side by side:
- Recorded is only what you actually entered. An empty value adds nothing here. It is not counted as 0, and it does not pull averages down.
- Estimated (trackers with a schedule only) is your recorded figures with the gaps filled in. It is drawn as a separate dashed line. A number that adds up also gets an estimated total, and a Yes/No an estimated number of Yes answers.
The two are always kept apart. An estimate is a calculation shown beside your data. It never replaces a value and is never saved into an entry.
How an estimate is made
Each empty period is filled with the average of the periods you did record. The periods you recorded are never changed.
A period here is a day on a daily tracker, a month on a weekly or monthly one, and a year on a yearly one. So on a weekly tracker, a month with some weeks recorded is not filled in: only a month with nothing recorded is estimated.
The estimate covers the whole month or year, including days that haven’t happened yet, so you can see what the period would look like if you carry on as you have been. Longer periods are built from the shorter ones beneath them: a year from its months, and so on.
An estimate needs something to stand on. With even one recorded value there is an estimate (it simply repeats that value). With no recorded values there is no estimate at all. The app shows nothing rather than inventing numbers.
Example: a daily Steps tracker that adds up
In a 30-day month you recorded 10 days, 80,000 steps in total. The other 20 days are empty.
Recorded total: 80,000 steps.
Estimated total: each empty day is filled with your recorded average of 8,000 steps, so 80,000 + 20 × 8,000 = 240,000.
Now say one of the empty days really was a rest day with 0 steps, and you enter 0. That day is now recorded, so your recorded average becomes 80,000 ÷ 11 ≈ 7,273, and the 19 days still empty are filled with that. The estimated total drops to about 218,182.
The recorded total is still 80,000, because a 0 adds nothing to a total. But it was a true 0, so the estimate learned from it.
Leave it empty, or enter 0 / No?
The answer depends on what is true, not on what feels tidier.
Leave it empty when…
- You don’t know the value, or you didn’t measure it.
- You forgot to track it and can’t recover it.
- It doesn’t apply to this entry.
Enter 0 (or No) when…
- You know the real answer is zero: no glasses of water, no kilometres run, nothing spent today.
- You want that period to count as a real data point in your totals, averages and trends.
Don’t use 0 as a placeholder
A 0 is a real measurement. It lowers averages, can become your “lowest” figure, and stops that period from being estimated. If you didn’t actually measure zero, leave it empty.
How it plays out for each kind of metric
Numbers
A number metric combines several entries in one period in the way chosen when it was set up. Whichever way that is, empty values are skipped and never counted as 0.
- Add it up: an empty value adds nothing to the recorded total, and the estimate fills the gap with your typical amount. A 0 also adds nothing to the recorded total, but it counts as a real day, so the estimate takes it into account.
- Average it out: a 0 is averaged in like any other number, so it pulls the average down. Use it only if 0 is a genuine reading. For things like weight, mood or temperature, empty is almost always the right choice.
- Keep the highest: an empty value is ignored. A 0 next to other values on the same day only matters if they are all lower. A 0 on its own is that day’s value, and it lowers your average.
- Keep the lowest: an empty value is ignored. A 0 will usually become the lowest figure, so use it only if 0 really happened.
Yes / No
Yes counts as 1 and No as 0, so your stats show a Yes rate (the share of days answered Yes, for example 70%) along with the number of Yes answers. It is shown as a rate; the app never turns it into a yes-or-no verdict.
A No is a real answer and lowers the rate. An empty Yes/No is unknown: it is left out of the recorded rate, and on a tracker with a schedule it is estimated at the Yes rate of the periods you did answer.
A Yes/No starts as (Empty) (unknown) and is only Yes or No once you pick one. If you don’t touch it, it is saved empty, not as No. Pick (Empty) again to go back to unknown.
Choices
A choice also starts as (Empty) (unknown) until you pick one. (Empty) is not one of the choices: it is never counted as the first or the lowest one.
In the pie chart, an empty choice is its own grey slice, Uncategorized, so the pie still adds up to all your cards. It shows how much of your history has no choice yet. It is never shared out among the other choices.
The same goes for a pie of a total by your choices, such as Amount by Category: the amount of a card with no category goes to Uncategorized, so the pie adds up to the full total. A card whose amount is empty adds nothing to that pie, but it still counts in the Cards pie.
A choice added to a tracker later is empty on every earlier card. Periods before it was added just say when it was added, until you fill in the choice on some of their cards. Years and your whole history count those earlier cards as Uncategorized.
Pie charts are never estimated, even on a tracker with a schedule, because a guessed pick would not be a real answer.
If the choices have numbers (like a 0–10 scale) and you added the average, highest or lowest, those work like a number metric: an empty value is skipped, and on a tracker with a schedule it is estimated from the ones you picked. Don’t pick the lowest choice to stand in for “I don’t know”. Leave it as (Empty).
Multiple choices
A multiple choice lets you pick several values, like a new friend’s hobbies. It starts as (Empty), which means nothing was picked: either you don’t know, or none apply. Pick (Empty) again to clear everything you picked.
Like text and dates, a multiple choice has no totals, averages or charts, so there is nothing to estimate.
Text and dates
Text and date metrics have no totals, averages or charts, so there is nothing to estimate. An empty one is just empty in your history.
Good to know
- You can fill in an empty value at any time by editing the entry. Your stats refresh shortly afterwards.
- Estimates improve the more you record. With only a few recorded values an estimate is rough; with many it settles into your real pattern.
- If you’re not sure, leave it empty. Empty is honest: it never claims something you didn’t measure, and you can always add the real value later.